When connected to the USB connection on a computer or a powered USB hub such as the "Multi Dock charger", the AX3 can be configured and or downloaded at the same time as charging (this can not be done when connected to a wall charger). Using a powered USB hub such as the "Multi Dock charger" (can handle multiple devices simultaneously).It is recommended that the AX3 should be fully charged above 85% before being used in any experiment. NOTE: When updating firmware, the user is reminded not to interrupt the connection to the computer until they are told it is safe to do so. This process has been integrated into the OMGUI software and if an update is required the user will be guided through the process. Occasionally, it is necessary to update the firmware. The AX3 hardware internally runs its own software program, firmware. In the process of removing debris an air-duster may also prove useful. In the case where excessive debris is built up in the connector, debris must first be carefully removed using a soft-brush, pin or tweezers before sanitising. Such cleaning fluids are widely available distributors and retailers such as Farnell or RS. Connector pins can be cleaned electronic contact cleaner. Cleaning of the surfaces and strap maybe achieved using an Isopropyl alcohol based wipe (70% concentration).įrom time to time the connector of the AX3 may require cleaning or sanitising (depending on wear environment and wear frequency). If you don't always want it on that monitor then make sure you have a workspace saved that it is back on the bottom of your main screen.Looking after your device Cleaning deviceįrom time to time the components of the AX3 may require cleaning. If you do use 2 monitors drag the multidock to the second monitor, open it full screen and make sure you save this as your workspace. I learned all of this by simply exploring the workspace and a few shortcut tips from the documentation shortcut list. There are lots of options and if you take the time to explore the workspace it all makes perfect sense eventually. The tabs are always there.īut where it can go haywire ( i think this is your case) is when you float the multi dock and it can be lost possibly hiding behind the main view or if you use 2 monitors it might be over there. Simple and easy to see what you want with a keyboard shortcut or the mouse. This is all you need to know if your using one monitor. Or click the double down arrows bottom right. Double Click again it will be 1/3 screen. If you want it full screen double click the tab. You can also click once on a tab to open 1/3 screen. Pressing the "D " key will open and close the multidock to what ever tab you have highlighted. When you add these the multi dock should pop up 1/3 screen with the new tab open. Now go to Views and add the Piano roll or what every other tabs you need. You should see the multi dock tab "Console" as in my screenshot. Your screen should look like my screen shot unless you over wrote the Advanced workspace somehow. So why not study the documentation and tutorials and once you do understand it you will have no more issues.įirst solution I will offer is to open a Basic Project Template, Now choose the Advanced Workspace. I've never understood it, it never seems to behave how I expect, and there are so many different configuration options that there's no way to keep them straight. Can't I just have tabs along the top of the screen like every other application does? Honestly, the multi-dock is the #1 reason I am tempted to switch to a different DAW entirely.) And if you have multiple monitors, all bets are off. There are "workspaces", and there are "views", and there is "docking", but it's proprietary docking of some kind which is different from regular Windows docking. I really, really hate the multi-dock system. In attempting to make things easy, Cakewalk has managed to make switching among different views exquisitely confusing at every turn. (Years and years of wrestling with that stupid Multi Dock. Exiting out of CW entirely does not fix it for this project, but other projects work fine. I've long ago learned that when that happens, to look for a tiny window in the bottom corner which I have to maximize, but no tiny window now, trying to open any view does nothing at all. I have track view open, but trying to get to PRV or Console view etc nothing happens. Somehow, I've managed to make it so I can't bring up any views at all.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |